Machinery

Fatality Alert: Dragline falls into pond

Posted on by in Safety and tagged , , , .

On June 13, 2020, a dragline was found submerged in 25 feet of water where a miner had been using it to remove material from a pond. Divers attempted to locate the dragline operator, and after two days the dragline was extricated from the pond. The victim was recovered from the engine compartment behind the operator’s cab. The fatality, the ninth in 2020, was the second classified as “Machinery” related.

MSHA offers the following best practices to prevent these types of accidents: 

  • Maintain control of operating mobile equipment.
  • Keep all exits clear in cabs, including alternate and emergency exits, and make sure the doors open freely before beginning work.
  • Retrofit older models of equipment with current automatic braking systems.
  • Ensure all controls and brakes are set to the appropriate position for the task.

MSHA releases final report on machinery fatality

Posted on by in Safety and tagged , , , , .

The Mine Safety and Health Administration (MSHA) published the final report on a Nov. 16, 2019 fatality involving a contractor who stepped into the path of a bulldozer while spotting for a dump truck.

MSHA offers the following best practices to prevent these types of accidents: 

  1. Safety first. Before starting work, establish and discuss safe work procedures. Identify and control all hazards associated with the work and properly protect workers.
  2. Know where people are. Be aware of body positioning around equipment, traffic patterns, dump sites, and haul roads.
  3. Train miners and contractors on traffic controls, mobile equipment patterns, and other site-specific hazards.
  4. Stay alert. Do not place yourself in harm’s way.
  5. Communicate with mobile equipment operators and ensure they acknowledge your presence.
  6. Ensure travelways are clear before moving a vehicle or mobile equipment.
  7. Look behind you. Install “rear viewing” cameras or other collision warning systems on mobile equipment. When backing up, look over your shoulder to eliminate blind spots. When using mirrors, use all available mirrors.
  8. Wear reflective material while working around mobile equipment. Use flags, visible to equipment operators, to make miners and smaller vehicles more visible.